Din Radio Provision - Metra T 4544-444 Instrucciones De Instalación

DIN radio provision

1. Remove the metal "DIN" cage from your aftermarket radio.
2. Slide the cage into the assembled housing and secure it by bending the metal
locking tabs down.
3. Locate the factory wiring harness in the dash. Metra recommends using the
proper mating adapter from Metra or Axxess. Re-connect the negative battery
terminal and test the radio for proper operation.
4. Slide the aftermarket radio into the cage until secure.
5. Reassemble the dash in reverse order of disassembly.
(Figure A)
®
Kit Assembly 4544-444
37
Notes