104
ATX 280
User Manual
1
3
2
4
16.3
Periodic checks
Service stations ATX 280 shall be subject to pe-
riodic inspections.
Contact the technical service department or the
competent bodies, according to the regulations
in force in the country of use, at least to carry out
the following checks.
Check the integrity of the connection cables
n
and connector and the correct insertion on
the electronic board of the equipment
Periodically inspect external charge tubes
n
1 and 2 for damage and condition. If any
damage to the piping is found, discontinue
use of the ATX 280 and contact the techni-
cal service for replacement
Verify that filters are changed at the required
n
intervals for proper equipment operation