MAHLE ATX 280 FluidPRO Manual Del Usuario página 97

13. Automatic mode
You can access Automatic Mode by selecting
the desired vehicle model from the On Board DB
database.
In this way, all data related to the
selected automatic transmission
and ATF type will be set automati-
cally using the original ones indi-
cated by the vehicle manufacturer.
Alternatively it is possible to access the Automat-
ic Mode from the main menu: in this case the
user will have to manually set the transmission
data and the ATF type.
13.1
Description
The automatic cycle screen is divided into three
thematic tabs:
Type of ATF and quantity available in the
n
tank
Data of the automatic transmission to be
n
served
Use of cleaning and/or protective fluids
n
Note: For advanced service, you can also select
the option for sump cleaning, including filter and
gasket replacement.
Vehicle selection and data entry
Vehicle selection and data entry
1 Select the desired vehicle from the
"On Board DB" station database
2 At the end of the selection all the
information related to the service are
shown
Click on the button
3
Automatic Mode
4 Automatic transmission and ATF type
data will be loaded automatically
97
to enter the