MAHLE ATX 280 FluidPRO Manual Del Usuario página 74

74
ATX 280
User Manual
5.5
Safety devices
ATX 280 is equipped with the following safety
devices:
Allows the equipment to be
turned off by disconnecting
the power line. In any case,
Main switch the plug of the power supply
cable must be unplugged
from the mains before main-
tenance work is carried out
In all risk situations, the unit
enters a suspended state,
interrupting any cycles in use
and entering the recirculation
Electronic
control of phase. This allows the station
pressures to be used as a bypass, pre-
and temper- venting fluid from reaching the
atures new oil/exhaust oil/detergent
containers or components in
its hydraulic circuit. An acous-
tic beep warns the user
No tampering with the above men-
tioned safety devices is allowed.
Failure to comply with any of the
above safety rules will void all war-
ranties on the equipment.
5.6
Safety labels
This paragraph describes the safety related sym-
bols that may be present on the outside of the
equipment.
Alternating current
Protective grounding
Read the instruction
manual
Caution! Risk of elec-
tric shock