Receiving And Unpacking The Equipment; Unpacking - MAHLE ATX 280 FluidPRO Manual Del Usuario

8. Receiving and unpacking the equipment

8.1

Unpacking

Danger of overturning
The manufacturer declines all responsibility
for any damage to persons and/or property
deriving from incorrect removal of the equip-
ment from the pallet, carried out by unsuita-
ble personnel, with inadequate means and/
or protections and without following the reg-
ulations in force in terms of manual handling
of loads and the operating procedures de-
scribed in this manual.
Removing the packaging
Cut the strap and remove the card-
1
board
With the equipment on the pallet, cut
2
the clamps that tie the equipment to it
Remove the equipment from the pallet
3
Note: 2 people are required to per-
form this task
4 Raise the two front wheels by levering
the handle and the rear wheels (in this
way the operators do not have to lift
the full weight of the equipment)
Slowly lower the equipment from the
5
pallet using the rear wheels
85