REDEX DRP+1 Manual De Usuario página 12

3.4 Oil draining
We advise to change oil after 10000 hours of running.
In order to remove all residual particles in oil, do not hesitate to:
- Run the unit before draining in order to reduce the viscosity of the old lubricant
"Wash" the unit with fresh oil before refilling.
-
1. Unscrew the 2 oil input plugs of the DRP+ to allow air entering the gearbox.
2. Unscrew the 4 oil output plugs (2 per circuit) and wait until no more oil flows out from the unit.
NOTE:
Drained oil is a special industrial waste and should be handled according to current laws.
The following drawings show the exact location of the lubrication holes.
This document must not be reproduced nor information therein disclosed without our authorization
DRP+ User manual Ref.: RX182/009
Version 01/2017 - English
Page 10 / 30