Nussbaum SMART LIFT 2.30 SL Manual Del Usuario página 110

Made
in
Germany
5.5 LED display on the operating unit
The raising and lowering of the lift is monitored by a
position measuring system. The individual functions are
displayed additionally on the operating unit visually with
an LED display. In the following you will find individual
descriptions:
Operating unit on the control column
Figure 6
OA1 red LED "Up off" operator side active
K1 green LED Motor contactor operator side
active
UA1 red LED "Down off" operator side active
OA2 red LED "Up off" opposite side active
K2 green LED Motor contactor opposite side
active
UA2 red LED "Down off" opposite side active
Lift green LED Lift moves upwards
Lower green LED Lift moves downwards
Display in normal function
• Move upwards:
The following LED illuminates: Lift, K1, K2 and lower
illuminates.
• Move downwards:
The following LED illuminates: Lower, K1, K2 and raise
illuminates
• Upper end position reached (Up Off actuated):
The following LED illuminates: OAI, OA2, lift and lower
illuminate
• Upper end position reached (Down Off actu-
ated):
The following LED illuminates: UAI, UA2, lower and
raise illuminate
110 OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL_V4.4_DE-EN-FR-ES-IT