Nussbaum SMART LIFT 2.30 SL Manual Del Usuario página 133

9 Safety inspection
The safety inspection is required to guarantee operational
safety of the lift. It is to be done:
1. before first commissioning after setting up the lift
Use the "single safety inspection" form
2. After first commissioning, check regularly at least once
per year.
Use the "regular safety inspection" form
3. After changes to the lift construction.
Use the "extraordinary safety inspection" form
i Single and regular safety inspections must be done by
a specialist. It is recommended to do maintenance at
the same time.
After a change in construction (for example chang-
i
ing the load carrying capacity or changing the lifting
height) and after significant maintenance on load car-
rying parts (e.g. welding work), inspection by a techni-
cal expert is required (extraordinary safety inspection).
This inspection book contains forms for copying to be
used for safety inspections.
Please use the appropriate form, record the condition of
the inspected lift and leave the completed form in this
inspection book.
9.1 Assembly instructions capture bar fix-
ation
for SMART LIFT 2.30 SL
for SMART LIFT 2.35 SL
for SMART LIFT 2.40 SL
OPI_SMART LIFT 2.30 SL-2.35 SL-2.40 SL_V4.4_DE-EN-FR-ES-IT
Tools required
1: Nail puller
2: Allen key 6 mm
3: Allen key 3 mm
1 2 3
Scope of delivery
Screw M8 2x Guide bar 2x
Nuts 2x
Base plate 2x
Safety system SL
Lift nut
Locking nut
Latch
Capture hook
Fixing bracket 2x
133