en
6 | EPS 205 | Symbols used
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
symbol
KEY WORD – Nature and source of hazard!
Consequences of hazard in the event of fail-
ure to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-obser-
vance:
Key word
Probability of
occurrence
DANGER
Immediate impend-
ing danger
WARNING
Possible impending
danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible property damage.
!
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of several steps.
2.
operation
One-step
Instruction consisting of one step.
e
operation
Intermediate
An instruction produces a visible inter-
result
mediate result.
Final result
There is a visible final result on com-
"
pletion of the instruction.
|
1 689 989 186
2017-10-27
Severity of danger if in-
structions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2
On the product
!
Observe all warning notices on products and ensure
they remain legible.
WARNING - Risk of burns from hot surfaces
Contact with hot components and the hot
test equipment (e.g. injection chamber) may
cause severe burns.
¶
Allow the components and test equipment
to cool down.
¶
Wear protective gloves.
Always wear safety goggles when working
with the EPS 205.
Thoroughly study the operating instructions
before working with the EPS 205.
Always wear protective gloves when working
with the EPS 205.
DANGER - Risk of fatal injury from electro-
magnetic fields
The high voltages at the CRI Piezo (charging
of the actuators) and at the adapter cables
are a source of potential fatal injury for per-
sons wearing pace-makers.
¶
Anyone wearing a pace-maker is not al-
lowed to perform "Common Rail Injector
(CRI Piezo)" testing.
WARNING – Risk of fire and explosion due
to flammable vapors
There is a risk of fire and explosion when
working with flammable vapors in the
vicinity of the EPS 205 as components of
the EPS 205 could give rise to arcing and
sparkover. Explosions can cause burns and
injuries.
¶
Never expose the EPS 205 to flammable
vapors.
¶
Install the EPS 205 at least 460 mm above
the floor.
The three-phase AC network for the EPS 205
must be protected by an automatic circuit
breaker.
Unplug the three-phase AC connector before
performing service work on the EPS 205.
Robert Bosch GmbH