Left Parallel Section Lengthwise Compensation; Needle Throwing Width Of The Right Bottom Of Eyelet Setting; Needle Throwing Width Of The Left Bottom Of Eyelet Setting; Needle Throwing Width Setting - JUKI MEB-3200 Manual De Instrucciones

(8) Left parallel section lengthwise compensation

1

(9) Needle throwing width of the right bottom of eyelet setting

1

(10) Needle throwing width of the left bottom of eyelet setting

1

(11) Needle throwing width setting

1

(12) Number of stitches of the slant taper bar

1
−
2
＋
2
2
2
2
Length from the bottom of eyelet to the left
side of parallel section can be adjusted.
Set the length wth [RIGHT
key 2 .
Settng can be performed − 0.6 to 0.6 mm n the
ncrements of 0.1 mm.
• Needle throwing width of the right side of
the bottom of eyelet can be set.
• Feed base is actuated with the needle
throwing to change the sewing width.
Set the wdth wth [RIGHT
key 2 . The wdth can be set wthn the range of 2.3
±1.0 mm for S type, 2.5 ± 1.0 mm for J type, 2.5 ±
1.0 mm for C type and 2.3 ± 1.0 mm for T type n the
ncrements of 0.1 mm.
• Needle throwing width of the left side of
the bottom of eyelet can be set.
• Feed base is actuated with the needle
throwing to change the sewing width.
Set the wdth wth [RIGHT
key 2 . The wdth can be set wthn the range of 2.3
±1.0 mm for S type, 2.5 ± 1.0 mm for J type, 2.5 ±
1.0 mm for C type and 2.3 ± 1.0 mm for T type n the
ncrements of 0.1 mm.
• Needle throwing width of the whole
buttonholing can be set.
• Feed base is actuated with the needle
throwing to change the sewing width.
Set the wdth wth [RIGHT
key 2 . The wdth can be set wthn the range of 2.3
±1.0 mm for S type, 2.5 ± 1.0 mm for J type, 2.5 ±
1.0 mm for C type and 2.3 ± 1.0 mm for T type n the
ncrements of 0.1 mm.
Number of stitches of the slant section from
the taper bar to the parallel section can be set.
Set the number of sttches wth [RIGHT
[RIGHT ] key 2 .
Settng can be performed 2 to 30 sttches wthn the
range of number of sttches of the taper bar.
] key 1 or [RIGHT ]
] key 1 or [RIGHT ]
] key 1 or [RIGHT ]
] key 1 or [RIGHT ]
] key 1 or