JUKI MEB-3200 Manual De Instrucciones página 73

5
A
7) When assembling is completed, return the sewing
machine to its home position. When returning
the sewing machine, support periphery ribs 2
of the machine bed with your left hand, hold grip
5 of the hinge stopper section with your right
hand, pull it to this side (direction A) to release
the lock and slowly lower the sewing machine
after confirming that there is no tool such as
screwdriver and the like in the bottom cover.
8) Take your right hand off from the hinge stopper
section, support periphery ribs 2 of machine bed
with your both hands and further lower the sewing
machine.
DANGER :
1. Do not lower the sewing machine while
keeping pulling the hinge stopper in
direction A, in order to prevent pining of
fingers, hands and arms under the sewing
machine leading to a serious injury.
2. Do not hold feed base 3 and feed guide
shaft fixing base 4 .
9) The lock works two times for the safety while the
sewing machine is lowered. Every time, support
the periphery ribs of machine bed with your left
hand, hold the grip of hinge stopper section with
your right hand, release the lock, and slowly
lower the sewing machine.
DANGER :
Take care to prevent pinching of hands
and fingers between the sewing machine
and the bottom cover. In particular, never
lower the sewing machine holding parts
other than the bed rib with two or more
workers, since doing so can cause pinch-
ing of hands, fingers and arms leading to
a serious injury.
10) When the sewing machine is completely lowered,
attach stopper screw 1 that has been removed
before.
59