Engine Oil Level Check - Yamaha WaveRunner FX140 Manual De Servicio

Ocultar thumbs Ver también para WaveRunner FX140:
Tabla de contenido

Publicidad

INSP
ADJ
POWER UNIT
9. Remove:
• Dial gauge
• Dial gauge stand
• Dial gauge needle
10. Install:
• All removed parts
NOTE:
For installation, reverse the removal proce-
dure.

Engine oil level check

1. Place the watercraft in a horizontal posi-
tion.
2. Check:
• Engine oil level
Checking steps:
CAUTION:
• When checking the oil level in water,
stay clear of other boats. The water-
craft could be drifted away by the cur-
rent or wind.
• Do not run the engine for more than 15
seconds
without
when checking the oil level on land.
The engine could overheat.
• Do not run the engine with too much or
not enough oil in the oil tank. Oil could
spray out or the engine could be dam-
aged.
3-16
E
supplying
water,

Publicidad

Tabla de contenido
loading

Tabla de contenido