Interleave 2 Of 5 - Medtronic ACT Plus Manual Del Usuario

Scan the "Code 39 Full ASCII Conversion" bar code to allow for use of Code 39 full
ASCII barcodes.
Figure 12. Enable Code 39 Full ASCII

Interleave 2 of 5

Scan the "Enable Interleave 2 of 5 Check Digit" barcode if the UID/PID barcodes
use Interleave 2 of 5 check digit to verify a correct scan.
Figure 13. USS Check Digit
Scan the "Interleave 2 of 5 Any Length" bar code for use of Interleave 2 of 5
barcodes with any lengths.
Figure 14. 2 of 5 - Any Length
Scan the "Disable Interleave 2 of 5 Check Digit" barcode if the UID/PID barcodes
do not use Interleave 2 of 5 check digit to verify a correct scan. The default setting
is Interleave 2 of 5 Disabled so this barcode should only be used if Interleave 2 of
5 was mistakenly enabled in the previous step.
Note: Disabling the Interleave 2 of 5 Check Digit will allow the scanner to scan a
barcode that has the check digit and add it to the data.
Figure 15. Disable
®
ACT Plus Operator's Manual English 63