Select The Location For The Act Plus ® Instrument; Add/Delete User Ids; Add A User Id; Delete A User Id - Medtronic ACT Plus Manual Del Usuario

Select the location for the ACT Plus
From the QC Manager Setup:
1. To change the desired location, select [Location].
2. Continue to press [Location] until the correct location is found.
3. To confirm the selection, press [Enter].

Add/delete User IDs:

Note: Up to 600 User IDs can be entered into the ACT Plus.
From the QC Manager Setup screen:
1. Select [User ID Setup].
From the User ID Setup screen:
1. Select [Add/Delete User IDs]. The following keys appear: [Add], [Delete],
and [Exit to User ID Setup].

Add a User ID:

From the Add/Delete User IDs screen:
1. Select [Add].
2. Enter the User ID using the numeric keypad. Press the decimal point "." on
the keypad to activate alpha characters.
3. To select the desired character, use the [A...Z] and [Z...A] keys.
4. To confirm the selection, press [Enter].

Delete a User ID:

From the Add/Delete User ID screen:
1. Select [Delete].
2. Use the arrows on either side of the displayed box to navigate up or down to
select the desired User ID.
3. To remove the User ID from the list, select [Delete Selection].
4. To return to the User ID Setup screen, select [Exit to User ID Setup].

Enable User Lockout:

From the User ID Setup screen:
1. Select [User Lockout].
2. To view the choices, [ON] or [OFF], continue to press [User Lockout].
3. To confirm the selection, press [Enter].
36 English
®
instrument:
ACT Plus® Operator's Manual