Publicidad
Troubleshooting
f
Condition
The fabric is not being
fed smoothly.
The needle breaks.
The thread breaks,
Skipped stitches
occur.
The seam is not sewn
neatly.
Seam puckering occurs°
The machine does not
operate.
The fabric is not cut
neatly.
Cause
I..
The feed dog is packed with lint,
2,. The presser foot has been raised
!o
The needle is incorrectly inserted,
2,, The needle is bent or blunt,
3,
The fabric is forcefully pulled,,
1_, The machine is not correctly threaded,,
2.
The needle or looper thread tension is too tight,
3.
The needle is incorrectly inserted,,
4.
The needle is bent or blunt.
t_
The machine is not correctly threaded_
2o The needle is bent or blunt.
3.
The needle is incorrectly inserted,
I
The needle and!or looper thread tensions are not correctly
adjusted,
2.
The machine is not correctly threaded,
3,
The needle and/or the thread are not suitable for the fabric
being sewn.
4.
The thread is not between the tension discs
1.
The needle or looper thread tension is too tight_
2,
The machine is not correctly threaded,
3.
The differential feed dial is not correctly adjusted.
1
The machine has not been plugged in firmly.
21 The power switch is turned off,
Reference
See page 92,
Lower the presser foot.
See page 14.
See page 14.
Pull the fabric softly.
See pages 22 - 36.
See pages 46 - 50.
See page 14
See page 14.
See pages 22 - 36,
See page 14,
See page 14o
See pages 46 - 50,
See pages 22 - 36
See pages 44,45,52-
56,
62- 89
See pages 26,32,34,36.
See pages 46 - 50
See pages 22 - 36,
See page 12,
See page 6
See page 6.
1.
The position of the upper knife is not adjusted properly,
2o The upper knife is dull
See page 90.
Replace the upper knife
(see page 90).,
For customer assistance
call or e-mail:
1-877-SEWING-U
(1-877-739_4648)
9 am - 4:30 pro, CST, Monday - Friday
support@ kenmore-sewing.com
96
Publicidad
Capítulos
