Publicidad
[_ Insert thread between the tension discs from the right.
Hold the thread at both ends and tug gently to ensure
the thread is fully inserted between the tension discs..
% Pass the thread over lower looper thread guide 1
Lower looper thread tension dial
(_ Lower looper thread guide 'I
t
NOTE:
Make sure that the thread is fully inserted between the
tension discs, tf it is not, the serger will not stitch
correctly..
(1) Thread
(2) Tension discs
[] Pass the thread through lower looper thread guide 2 (_o
[] Pass the thread through the lower thread take-up
lever Q.,
[] Pass the thread through looper thread guide 3 (_.
Pass the thread through lower looper thread guide 4 (_)_
(_) Lower looper thread guide 2
(2) Lower thread take-up lever
(_) Lower looper thread guide 3
O Lower looper thread guide 4
k.. ......
f
f
_%_%
J
[] Open the side cover.
Turn the handwhee! toward you until the lower looper
comes to the right, and pass the looper threader through
the hole on lower looper thread guide 5 Oo
Hook the end of the thread on the threader
O Lower looper thread guide 5
i
OTE:
Looper threader is not furnished with machine, but may
be ordered (page 4).
If you don't have the looper threader, turn the handwheel
towards you until the lower looper comes to its most left
position.
(1) Lower looper thread
(2) Looper threader
26
J
Publicidad
Capítulos
