Sartorius Gold & Carat II Line GL822I-2 Serie Instrucciones De Manejo página 10

Operating Concept
4.2.1 Buttons
Symbol Designation
[On/Off] button
[Menu] button
[Zero] button
[Tare] button
[Print] button
[Adjust] button
[GLP] button
[Toggle between
weight units]
button
[Back] button
[Up] button
[Down] button
[Confirm] button
10 Operating Instructions Gold&Carat II Line
Description
— When the button is pressed: Switches the operating display on.
— If the button is held down: Switches the operating display off.
— When the button is pressed: The settings menu opens.
— If the button is held down: It switches to version display.
Zeroes the device.
Starts taring.
Exports the readouts to the integrated data interfaces.
Starts the set calibration and adjustment function.
Exits the GLP printout and starts printing the GLP footer.
If the "Toggle between weight units" function is active:
— If the button is held down: Accesses the "Toggle between weight units"
function menu.
— When the button is pressed: Switches between the basic unit display and up to
4 other units.
— In the menu:
— When the button is pressed: Returns to the previous display.
— If the button is held down: Saves the menu settings.
— When entering digits: Selects the previous digit position.
— For an active application: Exits the application and deletes the set reference
value.
— In the menu: Scrolls through the menu levels or the available parameters.
— When entering digits: Increases the displayed value.
— In the main display of an active application: Switches to the display of the
current weight value | parameter.
— In the menu: Scrolls through the menu levels or the available parameters.
— When entering digits: Decreases the displayed value.
— In the main display of an application that is not active: Accesses the display to
set the reference values.
— In the main display of an active application: Switches to the display of the
current weight value | parameter.
— In the menu: Accesses the displayed menu level or confirms the displayed
parameter.
— When entering digits: Selects the next digit position.
— In the main display of an application that is not active: Starts the application
process and saves the set reference value.
— In the main display of an active application: Adopts the next component or the
next parameter.