Publicidad
Idiomas disponibles
Idiomas disponibles
System Settings
7.3.4
"DEVICE"/"USB" Menu
Parameter
Setting values
DAT.REC.**
XBPI
SBI*
REM.DISP.
PC.SPREA.
YDP20
YDP30
PC.TEXT
OFF
BAUD**
600, 1200, 2400,
4800, 9600*,
19200, 38400,
57600, 115200
PARITY**
ODD*
EVEN
NONE
HANDSHK.** HARDW.
NONE*
DATABIT**
7 BITS
8 BITS*
DEV.USED
NONE*, PRINTER,
VIRT.COM, PC
HOST, REM.DISP.
* Factory setting
** Are blocked if "PRINTER" or "REM.DISP." are displayed under "DEV.USED"
7.3.5
"DEVICE"/"EXTRAS" Menu
Parameter
Setting values
MENU
EDITABL.*
RD.ONLY
SIGNAL
OFF
ON*
* Factory setting
20
Operating Instructions Gold&Carat II Line
Explanations
Extended range of commands to control numerous balance functions with
binary protocol for direct communication with the device.
Enables SBI communication. The data is output to a PC or control unit.
Enables the use of ESC commands from a PC to control the basic balance
functions with ASCII protocol.
Enables data output on another display.
Enables data output to a spreadsheet program via a direct PC connection.
Sets the standard settings of YDP20 printers.
Sets the standard settings of YDP30 printers.
The balance transmits the data via keyboard command to the currently
opened application on the PC in text format.
Deactivates the data output.
Sets the baud rate to the selected value.
Applies an odd parity.
Applies an even parity.
Does not apply a parity.
Sets the handshake protocol to hardware handshake.
Does not set a handshake protocol.
Sets the number of data bits to 7.
Sets the number of data bits to 8.
Indicates which connection is detected at the USB port.
Explanation
Activates write access. The menu parameters can be changed.
Activates read access. The menu parameters cannot be changed.
Switches the acoustic signal off.
Switches the acoustic signal on.
Publicidad
