KEEWAY V302C Manual Del Propietário página 26

2. Overtaking light switch
When the "passing light button" is pressed, the overtaking light is on;
When the "passing light button" is released, the overtaking light does not light up.
Note：
Overtaking light is not on when current lamp light is in the high beam state
3. Turn signal switch
When turning left, turn the "turn signal switch" to the "" position; the front and rear turn signals on the left side, the left
turn indicator light in the instrument panel is on.
When turning to the right, turn the "turn signal switch" to the "" position; the front and rear turn signals on the right side
and the right turn indicator in the instrument panel are on.
Turn the "turn signal switch" to the "middle" position; the left and right turn signals and indicator lights will not light up.
Warning:
You must turn on the turn signal switch when you are about to turn or change lanes, and turn off the turn signal
switch until you have completed the turn or changed lanes.
" "
25