Publicidad
Idiomas disponibles
Idiomas disponibles
The pole terminal is not loose, and the positive and negative poles cannot be reversed. Reverse connection will damage
electrical parts.
[Battery charging]
1. Remove the vehicle seat cushion.
2. Remove the battery tie, remove the positive and negative wires, and take out the battery.
3. Connect the charger wire and ensure that the charging current is 1/10A of the battery capacity. For example, if you
charge a battery with a capacity of 10Ah, its charging current is 1 ampere.
4. For detailed instructions on the charger, please contact your dealer.
[Inspection and maintenance of battery]
1. When used frequently, the motorcycle charging system automatically fully charges the battery. If the motorcycle is used
occasionally or for a short period of time, the battery power may be insufficient. The battery will self-discharge, and the
self-discharge speed will vary with the battery type and ambient temperature.
2. When the motorcycle is not used for a long time, the battery must be removed and stored after charging, and the
battery should be charged regularly;
3. The positive (╋
) and negative (━
) terminals of the battery should be cleaned regularly.
4. When replacing batteries, use batteries of the same model and specifications.
67
Publicidad
