Publicidad
Idiomas disponibles
Idiomas disponibles
[Coolant Type]
Coolant has five characteristics of anti-corrosion, anti-cavitation, high boiling point, anti-scaling and anti-freezing.
The coolant is generally mixed with concentrated antifreeze and soft water (pure water or distilled water) in an
appropriate ratio. Please adjust it to a fixed concentration that is suitable for the local minimum temperature. Generally,
when it is adjusted to a concentration of 40% to 50%, the antifreeze function is the best.
It is recommended that you use the direct coolant specially designed for aluminum alloy engines. This coolant has been
prepared in the factory and contains antifreeze, rust inhibitor, foam inhibitor and trace silicate, etc., and the use is
indicated on the container Ambient temperature.
Note:
1. This coolant is a special coolant and cannot be replaced with tap water or other liquids, otherwise it may cause
damage to the engine.
2. Please go to the designated dealership to purchase direct type coolant exclusively for aluminum alloy engines.
3. If the coolant needs to be replaced or coolant leakage occurs, please go to the designated dealership for
replacement and maintenance.
[Check coolant capacity]
The total amount of coolant in the cooling system is about 4000ml
1. Park the motorcycle on a flat ground with a single support.
70
Publicidad
