Publicidad
Idiomas disponibles
Idiomas disponibles
smoothly and the running-in will not be good.
3. Reasonable use of each gear: Don't continue driving at a fixed engine speed. You can change the speed appropriately so
that all parts of the engine can "carry" the pressure, so that the engine can run in better.
4. Before driving, let the engine oil circulate: after the hot and cold engine is started, and before the load is applied, the
engine must be allowed to idle for sufficient time, so that the engine oil can be lubricated to all important parts of the
engine, reducing wear and extending use Life, it can also warm up the engine well.
5. Running-in of new tires: The tires also need to be run-in. Before the new tires are run-in, you should gradually increase
your turning angle within 160 kilometers, but avoid sudden braking, rapid acceleration and sharp turns.
Danger:
Poor tire running-in can cause tires to skid or lose control. When using new tires, you need to be especially careful.
Run the tires in within the first 160 kilometers (100 miles).
6. Overhaul during the running-in period: Please perform the vehicle overhaul after the new vehicle has been driven for
1,000 kilometers. During the running-in period, other parts have been engaged. At this time, all parts should be adjusted
well. Then change the oil.
Note:
When the vehicle is in a bad condition, it needs to be overhauled before 1000 kilometers.
31
Publicidad
