Publicidad
Idiomas disponibles
Idiomas disponibles
Warning:
1. The triangle mark indicates the location of the wear bar. If the wear bar touches the ground, the tire has worn to the
limit. The tires must be replaced.
2. When replacing tires, make sure that the size and model of replacement tires should conform to the contents of Table
3. If you change the tires of a different size or model, it will affect the handling performance of the motorcycle and may
cause the motorcycle to lose control.
3. After repairing or replacing tires, balance the wheels. It is very important to balance the wheel correctly to avoid
uneven contact between the tire and the road, and to avoid uneven wear of the tire.
Danger:
1. Tubeless tires are sealed at the contact part between the rim and the bead. In order to avoid air leakage, removing
·
and installing tubeless tires requires special tools to protect the rim and bead part, and a special tire changer is used.
2. To repair the small holes of a tubeless tire, you need to remove the tire and apply a patch on the inside of the tire.
Do not use external repair methods, because the centrifugal force of the tire will loosen the repaired area when
turning. The vehicle speed cannot exceed 80 kilometers per hour within 24 hours after the tire is repaired, and the
vehicle speed cannot exceed 130 kilometers per hour in the future. If you exceed the speed, the heat of the tire will
increase sharply, which will make the repair failure and cause the tire to leak. If the side of the tire is damaged, or the
damaged area is greater than 6 mm, the tire cannot be repaired and used.
29
Publicidad
