Publicidad
Idiomas disponibles
Idiomas disponibles
V. Operation guidance
5.1. New motorcycle running-in
The running-in period refers to a treatment method that is carried out in order to ensure that the joint
surface between the parts and the parts becomes the best joint state during the initial use of the new
vehicle. The correct running-in operation can maximize the life of the vehicle.
New vehicle running-in mileage: 1500km.
1. During the running-in period, it must be done: the throttle should be avoided to operate fully, and the maximum engine
speed should not exceed 6500 rpm (see the instrument). The vehicle speed is controlled in the following range:
0～300km running-in:
Avoid opening the throttle handle to exceed 1/2 of the maximum opening; the vehicle speed is within 50km/h.
300～600km running-in:
Avoid opening the throttle handle to exceed 2/3 of the maximum opening; the vehicle speed is within 60km/h.
600～1500km running-in:
The throttle handle should not exceed 3/4 of the maximum opening; the vehicle speed should be within 70km/h.
2. Avoid continuous low speed: When the engine is running at a certain low speed (light load), the parts will be polished
30
Publicidad
