2. Check the coolant level when the engine is cooling. The coolant level should be between the upper and lower scale
lines.
[Add a small amount of coolant]
If the coolant in the auxiliary water tank is at or below the lower mark, please add special coolant to the upper mark in
time.
Figure 33 Adding coolant
[Storage of Coolant]
1. When the coolant is not in use, it should be stored in a special sealed container.
[How to add]
1. Park the motorcycle with a single support on a flat
ground and wait for the engine to cool; otherwise the
heat may cause burns to the skin;
2. Unscrew the water tank cover;
3. Pour the cooling liquid from the mouth of the water
tank, and add the cooling liquid to the position of the
upper scale line;
4. Close the water tank cover.
71