Publicidad
Idiomas disponibles
Idiomas disponibles
8) Humidity percentage setting button
– Sets the humidity percentage in mixed cooking
mode (convection + steam). Press button once (the
green light fl ashes) and set the percentage of humi-
dity using the knob (10).
– To modify the percentage of humidity during coo-
king: press once to display the value of the humidity
on the display (13).
Press the button and turn the knob (10) to modify
the value set. Wait about 5 seconds for the new
value set to be saved.
In "convection cooking" mode you can adjust
the percentage of opening of the vent , which
is shown on the display (13) ("0" = vent always
open; "_._" = vent always closed).
– Increases the percentage of humidity: keep the but-
ton pressed to introduce humidity inside the oven
during any mixed or convection cooking phase.
– While cooking in "steam cooking" mode, this
switches from standard (Std) steam to super (Sup)
steam and vice-versa.
– To set the default value between Std and Sup steam:
With appliance in STOP phase (green indicator light
(2) on) press the button (14) longer than 3 seconds
(the entire panel switches off ). Keep the button
(8) pressed and act on the knob (10) to select Std
or SUP. Press the knob (10) to confi rm the change
made.
9) Product core probe or "vacuum" temperature
setting button
– Sets the cooking temperature inside the product:
measured by the core probe (optional) or with vacu-
um (optional); press once (green light fl ashes) to set
the temperature using the knob (10).
– Modifi es the temperature inside the product during
cooking: press once to show the temperature value
on the display (12).
Press the button and turn the knob (10) to modify
the value set.
GB
Wait about 5 seconds for the new value set to be saved.
This function disables use of the "Time setting" button (Timer).
10) Control knob
– For varying the values of the functions selected (see buttons 6, 7, 8, 9).
Turn the knob clockwise to increase the value and anti-clockwise to decrease it.
– Used to modify the cooking and washing programming parameters and the appliance's functio-
nal parameters.
– Also confi rms and saves: press the knob to confi rm and save the settings selected and/or shown
on the display.
11) Temperature display
– Shows the value of the temperature set.
To display the real temperature inside the oven, keep button (6) pressed until the display shows
the dot in the lower right.
The value on the display fl ashes at the start of a cooking process when the temperature inside
the oven is higher than the temperature set and/or during preheating when the set temperatu-
re has not been reached.
– During a pause in cooking, it shows the number of the "Regeneration" program available for
selection using button (15).
3338970_ut_GB
3 4 5
19
1
11
6
REAL
7
8
INJ
14
15
10
18
- 8 -
2
12
9
13
17
16
ENGLISH
Publicidad
