Grundfos CRE Manual De Instrucciones página 6

English (GB) Safety instructions
1. Original safety instructions
These safety instructions give a quick overview of the
safety precautions to be taken in connection with any
work on this product. Observe these safety
instructions during handling, installation, operation,
maintenance, service and repair of this product.
These safety instructions are a supplementary
document, and all safety instructions will appear
again in the relevant sections of the installation and
operating instructions. Keep these safety instructions
at the installation site for future reference.
2.2 Hazard statements
The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which, if
not avoided, will result in death or serious
personal injury.
WARNING
Indicates a hazardous situation which, if
not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which, if
not avoided, could result in minor or
moderate personal injury.
The hazard statements are structured in the following
way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
• Action to avoid the hazard.
2.3 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for explosion-
proof products.
A blue or grey circle with a white graphical
symbol indicates that an action must be
taken.
6
A red or grey circle with a diagonal bar,
possibly with a black graphical symbol,
indicates that an action must not be taken
or must be stopped.
If these instructions are not observed, it
may result in malfunction or damage to the
equipment.
Tips and advice that make the work easier.
3.2 Intended use of the product
Only use the product according to the specifications
stated in the installation and operating instructions.
3.3.2 Identification of the motor model
Identify the motor by means of the nameplate on the
terminal box.
Model K
Type: MGE160A 2-FF300-KA Type:
P.N.: -V
DE: Env.
NDE:
PF:
Wgt: kg Tam
3 × 380-480 V
Motor
1450-2200 2900-4000
[kW]
rpm
11 •
15 •
18.5 •
22 •
26 -
3.4 Radio module
CAUTION
Radiation
Minor or moderate personal injury
‐
Locate the product at a minimum
distance of 20 cm from any body parts.
Human tissue may be heated by RF
energy.
KA
OUTPUT Variant
P2: kW PB:
V n: rpm FM:
IE5
Made in Hungary
Hz PDS Eff : % HMI:
xxxv IES2
A CIM:
DK-8850 Bjerringbro Denmark
3 x 400-480 V
3500-4000
rpm rpm
- -
• -
• -
• -
- •