Publicidad
Idiomas disponibles
Idiomas disponibles
1. INSTRUCTIONS MANUAL - USE AND
STORAGE
This instructions manual is also available on the
website www.lapavoni.com. This instructions
manual is intended for the user, the owner of
the machine and for the technician in charge of
installation, and must always be available for
reference.
The purpose of the instructions manual
is to indicate the intended use of the
machine according to its design, its technical
characteristics and to provide instructions for
its correct use, cleaning and regulation. It also
provides important instructions regarding
maintenance, residual risks and any operations
that need to be carried out with particular care.
This manual should be considered part of the
machine and should be KEPT FOR FUTURE
REFERENCE until the machine is scrapped.
If it is lost or becomes damaged, you can request
a replacement to the manufacturer or your
dealer, indicating the machine model and serial
number shown on the identification plate.
This manual reflects the state of technology
at the time it was written. The manufacturer
reserves the right to make any necessary
technical modifications to its products and to
update the manuals with no obligation to revise
previous versions.
LA PAVONI S.p.A. declines any liability for damage
or injury that may be caused directly or indirectly
to people or property due to:
• the failure to comply with all the requirements
of current safety regulations
• incorrect installation
• defective power supply
• improper or incorrect use of the coffee machine
• use other than that specified in this publication
• lack of or incorrect scheduled and
recommended maintenance
• unauthorised modifications or repairs
• the use of non-original or non model-specific
spare parts
• complete or partial failure to follow the
instructions
• exceptional events
2. MACHINE FUNCTION
This appliance has been designed for professional
use to prepare espresso coffee using coffee
blends and to dispense hot water and/or steam.
Its components are made of non-toxic and
durable materials and are easily accessible for
cleaning and maintenance. In order for the
machine to be used properly, the operator
must have carefully read and understand the
instructions provided in this booklet.
The noise emitted by the machine does not
exceed 70dB.
3. INSTALLATION
A. Water supply
B. Drain conduit
D. Circuit breaker
E. Water softener
F. Boiler supply tap
G. Drip tray
I. Power cable
Before installing, make sure that:
• there are no dents, bumps or deformations
• there are no wet areas or other signs that may
indicate that the packaging has been exposed to
bad weather
• there are no signs that it has been tampered
with
After making sure that the machine has
been transported correctly, proceed with the
installation. Make sure that the machine can
be installed on a horizontal surface suitable for
supporting its weight, at a minimum height of 90
cm and that there is a clearance of at least 30 cm
around the machine. Then install the machine,
following the steps in the order described below.
3–1. CONNECTING TO THE WATER SUPPLY
The machine must be supplied with water
having a hardness of greater than 8°F. It
is not possible to reuse previously used
pipes and gaskets.
It is recommended that you install a water
softener on the machine water supply
system.
Make sure that the water in the water supply that
you will be connecting the machine to is potable.
This appliance should be connected to the water
supply in compliance with the national legislation
of the country in which it is used.
Only use the hose supplied with the machine, DO
NOT USE OTHER HOSES.
The maximum inlet pressure to the machine
from the water supply must not exceed 0,65MPa.
- Connect the water softener (E) to the water
supply (A).
20
Publicidad
