Hella Gutmann mega macs PC SE Manual De Instrucciones página 145

Hella Gutmann
You can enter 3 different hourly rates (net) and one VAT rate. These values are used to calculate the total amount of the
work to be done.
Proceed as follows to enter the basic values in the cost estimate:
1. Select Settings > Company in the main menu.
2. Select >Cost estimate<.
3. Open the virtual keypad under Hourly rate 1 (Net in EUR) with
4. Enter the required hourly rate.
5. Confirm your input with
ð The input will be saved automatically.
6. Repeat steps 3 to 5 for further entries.
10.2. Software Update of mega macs PC and HG-VCI PC
Here you can perform the updates of the software and the HG-VCI PC. Various system parameters are also displayed,
e.g.:
• Package version
• Module type (ID)
• Software version
Hella Gutmann Solutions supplies customers with regular software updates. The update is subject to charge. These up-
dates contain new vehicle systems as well as technical modifications and improvements. We recommend keeping your
software up to date.
10.2.1. Preconditions for an Update
Ensure the following to perform updates:
• The mega macs PC SE software is installed on a web-compatible PC.
• The HG-VCI PC is connected to a web-compatible PC via USB cable or Bluetooth.
• Bluetooth® compatible PC or Bluetooth® adapter connnected to the PC.
• The corresponding licenses are activated by Hella Gutmann.
• The driver package Hella Gutmann Drivers is installed on the PC.
• Voltage supply of PC and HG-VCI PC is guaranteed.
10.2.2. Calling Up System Information
Here you will find all information required for the identification of the mega macs PC SE software.
Proceed as follows to call up system information:
1. Select Settings > Update in the main menu.
mega macs PC SE
.
Configuring the mega macs PC SE | 10.
.
145