Hella Gutmann mega macs PC SE Manual De Instrucciones página 199

Hella Gutmann
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component groups
- Systems
- Data
4. Select the requested assembly.
5. Select the requested system.
6. Observe the info window.
7. Call up the >Information< tab.
8. Follow the instructions on the screen.
9. Start the manual coding with
10. Regard the window with information and instructions.
11. Follow the instructions on the screen.
12. Confirm the coding performed with
11.5.7.2. Performing Automatic Coding Procedures
WARNING
The ECU is not coded or is incorrectly coded
Death or severe injuries of persons due to improper or even wrong ECU operation
Material damage of the vehicle or the ambient area
Regard the following when performing coding procedures:
- Some working procedures require a specific training, e.g., working on the airbag.
- Regard the window with information and instructions.
Proceed as follows to perform an automatic coding procedure:
1. Perform steps 1 to 11 as described in section Vehicle selection.
mega macs PC SE
.
.
Working with the mega macs PC SE | 11.
199