Hella Gutmann mega macs PC SE Manual De Instrucciones página 194

11. | Working with the mega macs PC SE
7. Follow the instructions on the screen.
8. Start the automatic service reset with
9. Select the OBD plug and subsystem where necessary.
10. Regard the window with information and instructions.
11. Confirm the window with infos and instructions with
ð Communication to vehicle is being established. The service reset will be done automatically.
ð The message Service interval reset appears if the service reset was successful.
12. Confirm the info window with
11.5.6. Basic setting
Here you can adjust or adapt components and ECUs according to manufacturer's specifications.
11.5.6.1. Preconditions for Basic Settings
Regard the following in order to perform basic settings:
• Vehicle system is working properly.
• No trouble codes saved in ECU memory
• Vehicle-specific preparations performed.
11.5.6.2. Performing Manual Basic Settings
WARNING
Wrong or incorrectly performed basic settings
Risk of injury or material damage to vehicles
Regard the following when performing basic settings:
- Select the correct vehicle type.
- Regard the window with information and instructions.
Proceed as follows to perform the manual basic setting:
1. Perform steps 1 to 11 as described in section Vehicle selection.
194
.
.
.
Hella Gutmann
mega macs PC SE