Hella Gutmann mega macs PC SE Manual De Instrucciones página 154

10. | Configuring the mega macs PC SE
• User data such as company data
The following functions will be also modified or deleted:
• IP address mode
• Telekom HotSpot
• Bluetooth® MAC address
• asanetwork
• Display settings
• Confirmation of General terms and conditions
• Printer settings
Proceed as follows to perform a factory reset:
1. Select Settings > Miscellaneous.
2. Select >Miscellaneous<.
3. Push to start Factory reset.
4. Observe the confirmation prompt.
5. Confirm the confirmation prompt with
ð The mega macs PC SE software will be automatically reset to the condition at delivery.
10.6.2. Configuring the Car History
This menu provides the diagnostic results to the present vehicle from the functions >Trouble codes<, >Parameters<,
>Basic settings< and >Codings. This has the following advantages:
• You can evaluate the diagnostic results later.
• Compare previously performed diagnostics to present diagnostic results.
• You can show the customer the diagnostic results without needing to reconnect the vehicle.
10.6.2.1. Automatic Car History Transfer
If you have selected the option Automatic Car History Transfer, the data saved in the Car History will be automatically
transferred to Hella Gutmann.
Proceed as follows to transfer the Car History automatically:
1. Select Settings > Miscellaneous.
2. Select >Car History<.
3. Open a list under Automatic Car History Transfer with
4. Select >on< or >off<.
ð The selection will be saved automatically.
154
.
.
Hella Gutmann
mega macs PC SE