Hella Gutmann mega macs PC SE Manual De Instrucciones página 158

10. | Configuring the mega macs PC SE
10.8.2. Performing the VCI Plug Test
Proceed as follows to perform the test functions:
1. Select Settings > Test functions.
2. Push to start the VCI plug (USB) test.
ð The message VCI OK, no malfunction detected appears if the HG-VCI PC has been tested successfully.
10.8.3. Performing HG-VCI PC Diagnostics
This diagnostics is used to test the functionality of Bluetooth® connection for defects to determine data losses.
Proceed as follows to perform HG-VCI PC diagnostics:
1. Insert the Bluetooth® adapter into the USB port of the PC.
2. Select Settings > Test functions.
CAUTION!
Pulling off of the HG-VCI PC when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
158
Hella Gutmann
mega macs PC SE