Hella Gutmann mega macs PC SE Manual De Instrucciones página 206

11. | Working with the mega macs PC SE
11.6.3.1. Calling Up Service Data
Proceed as follows to call up service data:
1. Select >Vehicle information< in the main menu.
2. Select Service data with
3. Observe the info window.
4. Close the info window with
5. Select the required service types.
ð The individual tabs differ depending on the manufacturer and vehicle type selected.
ð You can retrieve additional vehicle information about the manufacturer, model, or type with
6. Select the another service interval where necessary.
7. Continue with .
ð Another tab is indicated.
ð The individual tabs differ depending on the manufacturer and vehicle type selected.
8. Activate the requested check box.
9. Continue with .
ð The service data with the individual working positions appears.
NOTICE
We recommend printing out the service data and processing the single working positions systematically.
This information will not be saved in the Car History.
10. Activate the check box for the processed working positions.
11. Enter the tire tread depth and the tire pressure under Further points after having done all working positions.
12. Open the virtual keypad under mm with
13. Enter the tire tread depth.
14. Confirm your entry with
15. Repeat steps 12 to 14 for further entries.
16. Open the virtual keypad under bar with
17. Enter the tire pressure.
18. Confirm your entry with
19. Repeat steps 16 to 18 for further entries.
20. Open the selection window under Date of next vehicle safety and emissions inspection: with
21. Open the list under Month with
206
.
where necessary.
.
.
.
.
.
Hella Gutmann
.
.
mega macs PC SE