Hella Gutmann mega macs PC SE Manual De Instrucciones página 189

Hella Gutmann
ð Diagnose a certain problematic case directly by selecting a parameter group, as only the parameters required for
it are stored.
16. Select additionally required parameters in the list Available parameters: by double-clicking if required.
ð You can select maximum 16 parameters at the same time.
17. Start the parameter reading with
ð During the readout procedure, the recordings are automatically saved in the Car History under the previously en-
tered license number.
NOTICE
A light blue bar in the top toolbar indicates how much of the memory space reserved for this purpose in the
Car History has been used. If the blue bar is complete, the first data of the present measurement will be re-
moved from the memory and the free capacity is filled with new data.
18. Press to cache the records of the selected parameters.
ð The recordings are saved in the Car History.
ð The parameter readout will start again afterwards.
19. Return to the list of parameter selection with
11.5.4. Actuators
Use this menu to activate components in electronic systems. You are hence able to check basic functions and cable con-
nections of those components.
11.5.4.1. Activating the actuator
DANGER
Rotating/moving parts (electric fan, brake calliper piston, etc.)
Danger of cutting or pinching fingers or device parts
Remove the following things from the danger zone before actuating actuators:
- Limbs
- Persons
- Device parts
- Cables
Proceed as follows to activate the actuator:
1. Perform steps 1 to 11 as described in section Vehicle selection.
mega macs PC SE
.
.
Working with the mega macs PC SE | 11.
189