Hella Gutmann mega macs PC SE Manual De Instrucciones página 188

11. | Working with the mega macs PC SE
NOTICE
Danger of short circuit and voltage peaks when connecting the HG-VCI PC
Danger of destruction of automotive electronics
Switch off ignition before connecting the HG-VCI PC to the vehicle.
2. Connect the HG-VCI PC to the vehicle's diagnostic connection.
ð Both LEDs of the HG-VCI PC flash.
ð The HG-VCI PC is ready for operation.
3. Select Diagnostics > Function > Parameters.
4. Regard the warning notice.
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component groups
- Systems
- Data
5. Select the requested assembly.
6. Regard the warning notice if appears.
7. Select the requested system.
8. Observe the information and instructions windows.
9. Call up the >Information< tab.
10. Follow the instructions on the screen.
11. Call up the parameter with
12. Select the OBD plug and system.
13. Regard the window with information and instructions.
14. Confirm the window with infos and instructions with
ð Communication to vehicle is being established. A selection window appears.
ð The device automatically adds the most important parameters to the list Selected parameters:.
ð Use
in the bottom toolbar to call up information on the selected parameters in the parameter selection menu,
e.g. component descriptions.
ð An explanation of the selected parameter appears.
15. Select the requested parameter group under Groups.
188
.
.
Hella Gutmann
mega macs PC SE