Hella Gutmann mega macs PC SE Manual De Instrucciones página 197

Hella Gutmann
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component groups
- Systems
- Data
4. Select the requested assembly.
5. Select the requested system.
6. Observe the information and instructions windows.
7. Call up the >Information< tab.
8. Follow the instructions on the screen.
9. Start the automatic basic setting with
10. Regard the window with information and instructions.
11. Confirm the window with infos and instructions with
ð Communication to vehicle is being established.
12. Select further sub-categories where necessary.
13. Confirm the selection with
14. Regard the window with information and instructions.
15. Confirm the window with infos and instructions with
ð Communication to vehicle is being established. Basic settings are made automatically.
ð The message Basic setting completed successfully appears if the basic setting was successful.
11.5.7. Coding
Here you can code components and ECUs. Codings are necessary, if components were replaced or additional functions in
an electronic system must be activated.
mega macs PC SE
.
.
Working with the mega macs PC SE | 11.
.
.
197