Hella Gutmann mega macs PC SE Manual De Instrucciones página 190

11. | Working with the mega macs PC SE
CAUTION!
Pulling off of the HG-VCI PC when actuating the clutch
Risk of injury or material damages
Proceed as follows before startup:
1. Apply the parking brake.
2. No gear is engaged.
3. Regard the window with information and instructions.
NOTICE
Danger of short circuit and voltage peaks when connecting the HG-VCI PC
Danger of destruction of automotive electronics
Switch off ignition before connecting the HG-VCI PC to the vehicle.
2. Connect the HG-VCI PC to the vehicle's diagnostic connection.
ð Both LEDs of the HG-VCI PC flash.
ð The HG-VCI PC is ready for operation.
3. Select Diagnostics > Function > Actuators.
4. Regard the warning notice if appears.
NOTICE
The selection of the following possibilities depends on the selected manufacturer and vehicle type:
- Functions
- Component groups
- Systems
- Data
5. Select the requested system.
6. Select the requested assembly.
7. Observe the info window.
8. Call up the >Information< tab.
9. Follow the instructions on the screen.
10. Start the actuator test with
11. Select the OBD plug and system.
190
.
Hella Gutmann
mega macs PC SE