Publicidad
Idiomas disponibles
Idiomas disponibles
Hella Gutmann
7. Confirm the selection with
ð Data download is in progress. Communication with the vehicle is established.
8. Observe the information and instructions windows. The message VIN could not be read out appears if the VIN could
not be read out.
9. Confirm the window with infos and instructions with
10. Repeat steps 5 to 8 where necessary.
11. Confirm the window with infos and instructions with
ð Communication to vehicle is being established. A drop-down list appears.
ð The corresponding vehicles are selected from the database.
12. Double-click the required vehicle to select.
13. Perform steps 8 to 11 as described in section Vehicle selection.
11.2.2. Identifying a Vehicle via asanetwork
NOTICE
Hella Gutmann Drivers shall be installed on the office or workshop PC.
The asanetwork connection shall be activated in Hella Gutmann Drivers.
The physical connection of the diagnostic device to the PC can be realized via Wi-Fi, LAN, USB or Bluetooth®.
Proceed as follows to identify a vehicle via asanetwork:
1. Select main menu > Settings > Miscellaneous.
2. Select >Miscellaneous<.
3. Go to Order management and push
ð The selection will be saved automatically.
4. Select >Vehicle selection< in the main menu.
5. Use
to open the window Identify vehicle with asanetwork.
6. Confirm the requested order.
ð Possibly confirm a detailed vehicle selection.
ð The order overview shows the following information: license plate, order number (from DMS) and start of service
(e.g. trouble code memory readout, vehicle manufacturer and model).
mega macs PC SE
.
to open the list and select >on<.
Working with the mega macs PC SE | 11.
where necessary.
.
175
Publicidad
