Ottobock C-Leg Prosthetic System Instrucciones De Uso página 44

Activating the 1st mode:
INFORMATION
If the C-Leg is in the 2nd mode, then the 1st mode is selected.
If the C-Leg is in the 3rd mode, then the 1st mode is selected.
If the C-Leg is already in the 1st mode, then this mode is reconfirmed.
The 1st mode remains active until the patient actively switches to the 2nd or 3rd mode.
Activating the 2nd mode:
INFORMATION
If the C-Leg is in the 1st mode, this is the way to switch to the 2nd mode.
If the C-Leg is in the 3rd mode, then the 2nd mode is selected.
If the C-Leg already is in the 2nd mode, this mode will be reconfirmed.
The 2nd mode remains turned on until the patient actively switches to the 1st mode or the charging process is
started.
INFORMATION
No provisions are made for using the remote control to switch to the 3rd mode. Switching to the 3rd mode is only
possible through specific movement patterns in the joint.
However, it is possible to switch from the 3rd mode to the 1st or 2nd mode with the remote control.
44 Ottobock
1
1
1 Activation of the remote control: Press key 3
and kep it pressed (Fig. 1) until the joint confirms the
activation with a vibration signal.
2 Activation of the 1st mode: Within 3 seconds
after activation of the remote control press key 1 and
keep it pressed (Fig. 2). You will hear a short beep
signal, and the joint switches to the 1st mode.
2
1 Activation of the remote control: Press key 3
and kep it pressed (Fig. 1) until the joint confirms the
activation with a vibration signal.
2 Activation of the 2nd mode: Within 3 seconds
after activation of the remote control press key 2 and
keep it pressed (Fig. 2). You will hear two short beep
signals, and the joint switches to the 2nd mode.
2
C-Leg Prosthetic System