Delivered Components; Installation Instructions; Prepare For Installation; Plan For Installation - EVBOX Livo Manual De Instalación Y De Usuario

4. Installation instructions

3.3. Delivered components

Components in the charging station box
1 Charging station with charging cable.
2 Wall bracket.
3 Installation kit.
3.1 Panel screws, 6x70 mm, T20, 3x.
3.2 Washers, M6, 3x.
Components in the cover box
1 Front cover.
2 Welcome pack (optional).
4. Installation instructions

4.1. Prepare for installation

4.1.1. Plan for installation

The following recommendations are a guide to help you plan the installation of the charging station.
Choose location
• Position the charging station, where possible, in a location where it is not exposed to direct sunlight and
vulnerable to external damage.
• The wall must have a flat structure and must be able to hold a load of at least 100 kg.
• The minimum free space around the charging station is 300 mm.
• The location must not cause the charging cable to have sharp bends.
• The power cable can enter the charging station from the top or the bottom. The bottom cable entry, choice A,
can be used in a dry location, and outdoors. The top cable entry, choice B, must only be used in a dry location.
3.3 Wall-plugs, 8x65 mm, 3x.
3.4 Screws, M4x12 mm, T20, 2x.
3.5 Torx bit, T20 security.
4 Cable gland kit.
4.1 Cable gland (with seal and blanking plug).
3 Installation and user manual, and User leaflet.
4 SIM card (optional).
EN
13