Publicidad
Idiomas disponibles
Idiomas disponibles
4. Installation instructions
6.
Prepare and connect the power cable as follows:
WARNING
Incorrect connection of the power wires can result in the risk of electric shock, and thus cause damage to the
charging station, and injury or death.
•
Make sure that the power wires are securely connected to the terminal block.
a.
Strip the wire ends of the power cable.
When stranded wires are used, install wire end
sleeves and apply a square crimp for optimal fit into
the terminal blocks.
b.
Push the wires into the terminal blocks. Connect the
wires in accordance with the power supply wiring
schematics in
Power supply requirements on page
Note
The connections L1, L2, L3, PE and N are shown on
the terminal blocks.
c.
Ensure that the wires are securely connected by
pulling each wire.
15.
EN
25
Publicidad
