Publicidad
Idiomas disponibles
Idiomas disponibles
EN
LED indicator
5.3. Maintenance by user
The user of the charging station is responsible for the condition of the charging station, whereby both the law
regarding the safety of persons, animals, and property must be observed, as well as the installation regulations in
force in the country of use. Have the charging station and its installation inspected by a qualified electrician on a
regular basis and in compliance with installation regulations applicable in your country.
DANGER
Extensive exposure of the charging station to water will result in the risk of electric shock, which will cause severe
injury or death.
•
Do not direct powerful jets of water toward or onto the charging station.
•
Do not put the charging plug into any liquid.
CAUTION
Do not use aggressive chemical cleaners or solvents to clean the charging station.
1.
Remove dirt and natural organic matter from the outside of the charging station using a damp soft cloth. Make
sure that the LED indicator and the light sensor are clean.
2.
Visually check the charging station, the charging cable and the charging plug. If you suspect that the charging
station, cable or plug are damaged or dirty, contact a qualified electrician to repair or replace the damaged
components.
3.
Gently pull on the charging station to make sure it is still securely attached. Make sure that the station outer
cover is secure. If the charging station or the cover is loose, contact a qualified electrician to correctly re-install
the station.
6. Decommissioning
Decommission and recycle the charging station in accordance with the applicable local disposal regulations.
7. Appendix
38
Color
If the charging station does not
reboot, then the station has
failed.
Do not dispose of this charging station in household waste. Instead, dispose of this charging
station at a local collection point for electric/electronic devices in order to enable recycling and
thus avoid negative and hazardous impacts on the environment. Ask your city or local authorities
for respective addresses.
Recycling of materials saves raw materials and energy and makes a major contribution to
conserving the environment.
State description
6. Decommissioning
Action
Immediately switch off power to the station
at the power supply. Request help from a
qualified electrician.
Different conditions can cause this
indication, including the following:
•
Failed relay.
•
System crash.
Publicidad
