Publicidad
Idiomas disponibles
Idiomas disponibles
5. User instructions
2.
Open the EVBox Install app and follow the instructions
in the app.
The charging station-specific information required for
station configuration is on the sticker removed during
installation.
3.
Using the EVBox Install app, set the following key settings to ensure that the charging station operates safely:
•
Maximum charging current.
•
Internet connectivity.
•
Other configuration settings.
4.7.2. Optional: Activate the charging station with CMP
For an online charging station, the user should activate the charging station with the Charging Management
Platform (CMP) on the CMP website or by using the CMP-specific app. Contact the Charging Point Operator (CPO)
for details about the charging station activation procedure.
4.7.3. Ready for use
The charging station is ready to charge an EV when the
covers are installed on the charging station, the
commissioning is completed, and 4 steady green LEDs
are shown on the LED indicator.
Make sure that the user knows how to charge an EV,
and understands the meaning of the LED states.
Retain all documentation delivered with the charging
station in a safe place for the entire life cycle of the
product.
5. User instructions
DANGER
Operating the charging station when it is damaged or worn will result in the risk of electric shock, which will cause
severe injury or death.
•
Do not operate the charging station if the power supply, the enclosure or an EV connector is broken, cracked,
open, or shows any other indication of damage.
•
Do not operate the charging station if a charging cable is frayed, has broken insulation, or shows any other
indication of damage.
•
In the event of danger and/or an accident, have the electrical supply to the charging station disconnected
immediately.
•
Contact your installer if you suspect that the charging station is damaged.
EN
35
Publicidad
