Publicidad
Idiomas disponibles
Idiomas disponibles
4. Installation instructions
4.5.1. Route communication cables
1.
Remove the cable gland nut and seal from the left cable
gland.
2.
Feed the required communication cables through the
cable gland nut then through the left cable gland in the
bottom of the charging station. Feed the cables through
the cable channel to the top of the charging station.
4.5.2. Optional: Connect Ethernet cable for Internet
Note
Use any network cable of Cat5 and above (Cat5, Cat5e, Cat6), with twisted paired wires.
•
The use of shielded network cable is recommended but not mandatory.
•
If a shielded cable is used, do not ground the shield.
•
For outdoor installations, use a UV stabilized network cable.
•
Network cables can have a pre-installed RJ45 plug, or the RJ45 plug can be installed before or after routing
the network cable into the charging station.
EN
27
Publicidad
