Publicidad
Idiomas disponibles
Idiomas disponibles
4. Installation instructions
b.
Install two security Torx T20 screws to attach the
charging station to the wall bracket.
c.
Gently pull on the charging station to make sure it is securely attached to the wall bracket and to the
wall.
4.4. Connect the power cable
The supplied cable gland can be used on a power cable with a sheath diameter of 13 to 25 mm. The terminal
blocks accept a wire gage in the following range:
•
Solid wire: maximum 10 mm².
•
Stranded wire with ferrule (without plastic sleeve): maximum 6 mm².
1.
Remove the inner cover as follows:
EN
21
Publicidad
