Publicidad
Idiomas disponibles
Idiomas disponibles
EN
a.
Loosen the 9 Torx security T20 captive screws that
attach the inner cover.
b.
Remove the inner cover.
2.
Choose the entry point of the power cable into the
charging station.
•
A - bottom entry: The cable enters through the
right cable gland then routes along the right side of
the charging station, over the cable support, to the
terminal blocks.
•
B - top entry: The cable enters through the top
cable gland then routes to the terminal blocks. The
top cable entry, B, must only be used in a dry
location.
CAUTION
Risk of water ingress. Rain and moisture can enter the
charging station when the top cable entry is used
outdoors, which can damage the charging station.
Note
Communication cable entry is only through the bottom
of the charging station.
3.
For B - top entry: Prepare the top entry for the power cable as follows:
22
4. Installation instructions
Publicidad
