Using The Windscreen Wiper/Washer; Using The Cab Heating; Using The Cab Climate Control System (*); Lighting System Operation - Nilfisk Advance RS 1300 Instrucciones De Uso

USING THE WINDSCREEN WIPER/WASHER

1. Turn the switch (33, Fig. D) to 1 position to start the windscreen wiper, and to 2 position (spring-return) to sprinkle the
detergent on the windscreen.
2. Turn the switch (33, Fig. D) to 0 position to stop the windscreen wiper.

USING THE CAB HEATING

1. To turn on the cab heating, turn the knob (15, Fig. E) counterclockwise as necessary.
2. Adjust the blower speed with the knob (6, Fig. E).
3. To turn off the cab heating, turn the knob (15, Fig. E) clockwise to the end of stroke.

USING THE CAB CLIMATE CONTROL SYSTEM (*)

(*) Optional
1. Turn the climate control knob (5, Fig. E) as necessary.
2. Adjust the blower speed with the knob (6, Fig. E).

LIGHTING SYSTEM OPERATION

To turn on the lighting and signalling system, use the combination switch (35, Fig. D), having the following functions:
– Headlights off, with mark (35b) at the symbol O
– Running lights on, with mark (35b) at the symbol
– Low beam on, with mark (35b) at the symbol
– High beam on, with mark (35b) at the symbol
– High beam temporary on, lifting the lever (35a)
– Right turn signal on, bringing the lever (35a) forward
– Left turn signal on, bringing the lever (35a) backward
– Horn activation, pushing the lever (35a) in the direction shown by the arrow (35c)
NOTE
The high and low beams can be turned on when the engine is running.
NOTE
The suction inlet light (46, Fig. G) turns on when the low beams are turned on, see position (3).

BRAKE LIGHTS

The brake lights turn on when pressing the brake pedal or when the machine is in "neutral" (drive pedal not pressed).

CEILING LIGHT OPERATION

Turn on the ceiling light (19, Fig. D) inside the cab by pressing on its left or right side. When the ceiling light is in central position, it
turns off.

3RD BROOM WORKING LIGHT OPERATION

Turn on the 3rd broom working light with the switch (16, Fig. D) and by turning the combination switch (35) in the position for the low
beam switching on.

HAZARD WARNING LIGHT OPERATION

Turn on the hazard warning lights with the switch (20, Fig. D).
INSTRUCTIONS FOR USE
and lowered lever (35a)
RS 1300 33018312(3)2010-01
ENGLISH
31