Important Safety Rules; Accessories; Fire-Fighting - Nussbaum TC 450 Manual De Instrucciones

4) Check to be certain that rim and beads are sufficiently lubricated. If necessary lubricate
some more.
5) Press the pedal down to position 1 (Fig. S/2).
6) If the bead of the tyre is not well seated, due to a strong bead, lift tyre manually until
the upper bead seals against the rim, then press the pedal all the way down (position 2,
Fig. S/2).
A strong jet of air will be released through the nozzles in the slides and this will help the
bead seal.
7) Release the tyre; set the pedal back to position 1 (Fig. S/1) and continue to inflate
the tyre to the required pressure.
N.B.: If you over inflate the tyre, hold the deflate button (1, Fig. S/2) until the cor-
rect pressure is reached. Release the button to check pressure on the manometer.

IMPORTANT SAFETY RULES!

1- Only specially trained personnel are allowed to perform these operations.
2- Do not allow others to operate or be near the tyre changer.
3- Do not mount tyre on rims if you cannot check that their diameters correspond.
4- Check to make sure the rim and the tyre have the same diameter.
5- Check to make sure the rim and the tyre are not damaged.
6- Seat beads and inflate tyres with short bursts of air checking the pressure frequently on the gauge.
7- NEVER exceed 3.5 bar (50 PSI) during bead seating operation.
IMPORTANT! If a higher tyre inflation pressure is required, remove the wheel from the tyre changer and continue the inflation procedure
with the wheel inside a special protection cage (commercially available).
8- After bead seating operation, NEVER exceed the maximum inflation pressure given by the tyre manufacturer.
9- ALWAYS keep hands and entire body back from inflating tyre.
A catalogue containing a list of the accessories available is supplied with the tyre changer.
All Nussbaum accessories come with a complete set of instructions for mounting on tyre changers and correct use. USE ONLY ORIGINAL
SPARES.
Using accessories that are not original can affect the safety of the tyre changer and immediately cause the Nussbaum warranty to become
invalid.
WARNING!
If this machine catches fire, only use powder extinguishers or, alternatively, CO
flames.
TC 450 - Liga C 270

11. ACCESSORIES

12. FIRE-FIGHTING

50
ENGLISH • Instructions manual
extinguishers to put out the
2
S/1
1
2
S/2