Battery Charger And Beeper - Ottobock Axon-Bus Prosthetic System Instrucciones De Uso

Action/Event
Connect charging plug
Disconnect charging plug
Emergency

10.2 Battery Charger and Beeper

The battery charger outputs operating states when connected to the power supply unit and the
Axon-Bus prosthetic system.
LED flashing
LED illuminated
LED not illuminated
Action/Event
Power supply unit connec­
ted to battery charger
Charging cable connected
to the charging receptacle
Charging in progress
Charging in progress
Charging in progress
Charging in progress
Charging in progress
11 Repair
11.1 Maintenance
Since all moving mechanical components are subject to wear and tear, regular service is required
within the guarantee period. The entire Axon-Bus prosthetic system is inspected by Ottobock Ser­
vice (Ottobock Myo-Service). Wear parts are replaced as required. Omitting a scheduled service
inspection voids the guarantee.
11.2 Troubleshooting
The Axon-Bus prosthetic system indicates operating states audibly and visually.
Action/Event
Error in the Axon-Bus pros­
thetic system
38 | Ottobock
Charging Beeper
receptacle
2x short
1x long
Pulsating
Battery charger Beeper
1x short
Charging Beeper
receptacle
1x long
Explanation
Charging begins
Charging is finished
Emergency opening of the
Axon-Bus gripping com­
ponent
Explanation
Power supply unit ready
Initialising charging pro­
cess
Battery empty
Battery 25% charged
Battery 50% charged
Battery 75% charged
Battery 100% charged
Remedy
Switch the Axon-Bus pros­
thetic system off/on
Open/close the Axon-Bus
gripping component
In case of a persistent
error, contact your pros­
thetist.